Solar Panel Degradation Calculator: How Much Output Will You Lose Every Year? A 2026 Guide
Solar panels do not last forever at full power. Every year, they lose a small bit of their efficiency. This is normal. A solar panel degradation calculator helps you figure out exactly how much power you will lose, year by year, so you know what to expect over the life of your system.
This guide explains it in simple terms. No confusing jargon. Just what you need to know.
What Is a Solar Panel Degradation Calculator
Think of it as a simple tool that tells you the future health of your solar panels.
You enter a few basic details, like your panel type and installation year. The solar panel degradation calculator then shows you a year-by-year estimate of how much power your panels will still produce.
This helps you plan your electricity savings realistically, instead of assuming your panels will always perform at 100 percent.
Why Do Solar Panels Lose Power Over Time
It comes down to natural wear and tear. Here is what causes it, in plain language:
Sunlight itself slowly wears down the panel material
Daily heating and cooling stresses the cells
Humidity and moisture can seep in over the years
Small cracks may form after many years of use
None of this means your panels are broken. It is just how solar technology ages, similar to how a phone battery holds less charge after a few years.
How Much Do Solar Panels Degrade Each Year
Most good quality panels lose about 0.5 percent to 0.8 percent of their power every year. There is also a slightly bigger drop, around 1 to 3 percent, in the very first year.
Here is a simple table to show what this looks like over time:
Here is a simple table to show what this looks like over time:
Panel Age | Approximate Output Remaining |
Year 1 | 97%–98% |
Year 5 | 94%–96% |
Year 10 | 90%–93% |
Year 15 | 86%–90% |
Year 20 | 83%–89% |
Year 25 | 80%–88% |
So even after 25 years, your panels are usually still producing 80 percent or more of their original power. That is why most manufacturers offer 25-year performance warranties.
How to Use a Solar Panel Degradation Calculator
Using one is easy. Just follow these steps:
Step 1: Enter your panel wattage and brand
Step 2: Add the degradation rate mentioned in your warranty (or use the default)
Step 3: Choose how many years you want to check, usually 25
Step 4: Look at the yearly output chart the calculator gives you
Step 5: Compare it with your actual solar generation data if you have monitoring
That is it. Within a few minutes, you get a clear picture of your system's future performance.
Why This Tool Is Useful
A solar panel degradation calculator is not just for engineers. It helps regular homeowners too.
You get a realistic idea of your long-term electricity savings
You can check if your panels are performing as promised in the warranty
Banks often ask for this kind of data when approving solar loans
If your output drops faster than expected, you know something needs checking
It helps you compare panel brands before buying
Approximate Solar Panel Cost in India
Here is a simple cost guide based on panel type, along with how well each type holds up over time.
Panel Type | Typical Annual Degradation | Approximate Cost per Watt (₹) | Estimated Output After 25 Years |
Standard Polycrystalline | 0.7%–0.8% | ₹22–₹26 | 80%–83% |
Standard Monocrystalline | 0.5%–0.6% | ₹26–₹30 | 85%–88% |
PERC Monocrystalline | 0.45%–0.55% | ₹28–₹33 | 87%–89% |
TOPCon Solar Panels | 0.3%–0.4% | ₹32–₹38 | 89%–92% |
Note: Prices are indicative for solar panels only and may vary depending on the brand, quantity, location, GST, and market conditions. Installation costs, inverter, mounting structure, wiring, and other Balance of System (BoS) components are additional. The estimated output after 25 years assumes normal operating conditions and typical manufacturer performance warranties.
How to Pick a Good Solar Panel Degradation Calculator
Not every calculator is equally reliable. Look for one that:
Lets you enter your specific panel brand's degradation rate
Adjusts for your local weather and climate
Gives you a simple year-by-year table, not just one final number
Is easy to use without needing technical knowledge
Mistakes People Often Make
Forgetting about the slightly bigger drop in the first year
Using a generic number instead of their actual panel's warranty rate
Blaming degradation for dust buildup, when the real fix is just cleaning the panels
Never comparing calculator estimates with real output data
Frequently Asked Questions
Is it normal for solar panels to lose power every year?
Yes. All solar panels lose a small amount of efficiency every year. This is completely normal and expected.
How accurate is a solar panel degradation calculator?
It gives a very close estimate based on industry data and your panel's warranty. Actual results can vary slightly due to weather and maintenance.
Does losing power mean my panels are damaged?
No. A slow, steady drop is normal. It is only a concern if the drop is much faster than what your warranty promises.
Which panels degrade the slowest?
TOPCon and PERC monocrystalline panels usually degrade the slowest, often less than 0.5 percent per year.
Final Thoughts
A solar panel degradation calculator makes solar planning much easier to understand. Instead of guessing, you get a clear, year-by-year picture of what your panels will produce over the next 25 years. This helps you save money smartly, choose better panels, and catch any real problems early.




Comments